Paper towel holder for SKÅDIS
A paper towel holder for the IKEA SKÅDIS pegboard. Two brackets 240 mm apart carry a loose 22 mm octagonal rod; the roll turns on the rod, and the rod does not turn in its notches. The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits. Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
- Dispatch
- Dispatch within 48 hours
- Warranty
- 24 months on manufacturing defects
- Shipping
- Shipping CZ 1–3 days · EU 3–7 days
01 the numbers
Measured on this model when it was prepared for printing. What the slicer did not measure is not listed.
Price = material + print time. Minimum €2.10 per part. The volume discount applies per product, from 3 pieces.
02 description
A paper towel holder for the IKEA SKÅDIS pegboard. Two brackets 240 mm apart carry a loose 22 mm octagonal rod; the roll turns on the rod, and the rod does not turn in its notches.
What it holds
- rolls up to 232 mm wide and 150 mm across, core from 30 mm
- Tork kitchen rolls of 209–230 mm
- collars at the sides keep the rod from sliding out
- 2 brackets and a rod, 25 cm wide, hangs on 2 hooks
Mounting
The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits.
Material and making
Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
Reviews
Honest words from verified customers — only people who received the print can post.
No reviews yet
Only customers with a delivered order can leave reviews.
04 questions
The five things people ask before placing an order.
How big a roll does it take?
Rolls up to 232 mm wide and 150 mm across with a core from 30 mm, which is every common kitchen roll.
Does it fit an IKEA SKÅDIS pegboard?
Yes. It is drawn for the 5 × 15 mm slots, 40 mm apart, and the board of about 5 mm that SKÅDIS has. It needs at least 8 mm of space behind the board.
Is this an original IKEA accessory?
No. Niro3D designs and prints it. SKÅDIS is the name of the IKEA board it is drawn for; we have no tie to IKEA.
What is it printed in?
In PLA. The colour is chosen when ordering, and the part prints in one piece without supports.
What materials are available for this product?
Available in PLA, PETG, and special finishes like PLA Silk and PLA Galaxy. PLA is ideal for decorative items; PETG for functional parts requiring durability. Select your material at checkout.
Fig. 06 — Start here
Ready to start printing?
Upload your model or choose from ready-made prints. See the price right after upload.