WAGO connector organiser for SKÅDIS
A WAGO connector organiser for the IKEA SKÅDIS pegboard. Four 100 mm columns, one per type; the connectors lie levers up, and the lowest one slides out onto a ledge with a lip. The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits. Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
- Dispatch
- Dispatch within 48 hours
- Warranty
- 24 months on manufacturing defects
- Shipping
- Shipping CZ 1–3 days · EU 3–7 days
01 the numbers
Measured on this model when it was prepared for printing. What the slicer did not measure is not listed.
Price = material + print time. Minimum €2.10 per part. The volume discount applies per product, from 3 pieces.
02 description
A WAGO connector organiser for the IKEA SKÅDIS pegboard. Four 100 mm columns, one per type; the connectors lie levers up, and the lowest one slides out onto a ledge with a lip.
What it holds
- WAGO 221-412, 221-413, 221-415 and 2273-204
- about 12 of the 221s and 17 of the 2273s per column
- a front slot shows how many are left
- 9.5 cm wide, hangs on 2 hooks
Mounting
The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits.
Material and making
Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
Reviews
Honest words from verified customers — only people who received the print can post.
No reviews yet
Only customers with a delivered order can leave reviews.
04 questions
The five things people ask before placing an order.
Which WAGO connectors does it take?
The 221-412, 221-413 and 221-415 lever connectors and the 2273-204 push-in connector, one type per column.
Does it fit an IKEA SKÅDIS pegboard?
Yes. It is drawn for the 5 × 15 mm slots, 40 mm apart, and the board of about 5 mm that SKÅDIS has. It needs at least 8 mm of space behind the board.
Is this an original IKEA accessory?
No. Niro3D designs and prints it. SKÅDIS is the name of the IKEA board it is drawn for; we have no tie to IKEA.
What is it printed in?
In PLA. The colour is chosen when ordering, and the part prints in one piece without supports.
What materials are available for this product?
Available in PLA, PETG, and special finishes like PLA Silk and PLA Galaxy. PLA is ideal for decorative items; PETG for functional parts requiring durability. Select your material at checkout.
Fig. 06 — Start here
Ready to start printing?
Upload your model or choose from ready-made prints. See the price right after upload.