Holder for 24 bits for SKÅDIS
A holder for 24 ¼" bits for the IKEA SKÅDIS pegboard. The bits stand in 6.7 mm hex holes, 12 mm deep, sit snug and come out by hand. The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits. Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
- Dispatch
- Dispatch within 48 hours
- Warranty
- 24 months on manufacturing defects
- Shipping
- Shipping CZ 1–3 days · EU 3–7 days
01 the numbers
Measured on this model when it was prepared for printing. What the slicer did not measure is not listed.
Price = material + print time. Minimum €2.10 per part. The volume discount applies per product, from 3 pieces.
02 description
A holder for 24 ¼" bits for the IKEA SKÅDIS pegboard. The bits stand in 6.7 mm hex holes, 12 mm deep, sit snug and come out by hand.
What it holds
- every ¼" (6.35 mm) bit, 25 and 50 mm long
- a magnetic bit holder fits too
- a 25 mm bit stands 13 mm out, a 50 mm bit 38 mm
- 24 holes on a 10.5 × 8.5 mm grid, 9 cm wide
Mounting
The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits.
Material and making
Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
Reviews
Honest words from verified customers — only people who received the print can post.
No reviews yet
Only customers with a delivered order can leave reviews.
04 questions
The five things people ask before placing an order.
Do the bits fall out if the holder is knocked?
No. Each hole has only about 0.35 mm of play, which printing narrows a little more, so a bit sits snug and comes out by hand.
Does it fit an IKEA SKÅDIS pegboard?
Yes. It is drawn for the 5 × 15 mm slots, 40 mm apart, and the board of about 5 mm that SKÅDIS has. It needs at least 8 mm of space behind the board.
Is this an original IKEA accessory?
No. Niro3D designs and prints it. SKÅDIS is the name of the IKEA board it is drawn for; we have no tie to IKEA.
What is it printed in?
In PLA. The colour is chosen when ordering, and the part prints in one piece without supports.
What materials are available for this product?
Available in PLA, PETG, and special finishes like PLA Silk and PLA Galaxy. PLA is ideal for decorative items; PETG for functional parts requiring durability. Select your material at checkout.
Fig. 06 — Start here
Ready to start printing?
Upload your model or choose from ready-made prints. See the price right after upload.