Tilt drawer for SKÅDIS
A tilt drawer for the IKEA SKÅDIS pegboard. The 0.4 l bin tilts out on two pins up to 32° and swings shut on its own; closed, it lifts out for filling. The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits. Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
- Dispatch
- Dispatch within 48 hours
- Warranty
- 24 months on manufacturing defects
- Shipping
- Shipping CZ 1–3 days · EU 3–7 days
01 the numbers
Measured on this model when it was prepared for printing. What the slicer did not measure is not listed.
Price = material + print time. Minimum €2.10 per part. The volume discount applies per product, from 3 pieces.
02 description
A tilt drawer for the IKEA SKÅDIS pegboard. The 0.4 l bin tilts out on two pins up to 32° and swings shut on its own; closed, it lifts out for filling.
What it holds
- screws, wall plugs and small parts, about 0.4 l
- tilts out to 32°, a stop holds it at 33°
- let go open, it swings shut by itself
- frame and bin print side by side, 14 cm wide
Mounting
The part hangs by its hooks in the 5 × 15 mm slots, 40 mm apart, of an IKEA SKÅDIS pegboard (about 5 mm thick), with no screws or tools. It needs at least 8 mm of free space behind the board, which the usual wall spacers give. It is not an IKEA product: SKÅDIS is named only as the board it fits.
Material and making
Printed in PLA without supports, in the colour of your choice. Made by Niro3D, dispatched within 48 h.
Reviews
Honest words from verified customers — only people who received the print can post.
No reviews yet
Only customers with a delivered order can leave reviews.
04 questions
The five things people ask before placing an order.
Can the bin be taken out?
Yes. Closed, the bin lifts straight out of the frame, for filling or emptying.
Does it fit an IKEA SKÅDIS pegboard?
Yes. It is drawn for the 5 × 15 mm slots, 40 mm apart, and the board of about 5 mm that SKÅDIS has. It needs at least 8 mm of space behind the board.
Is this an original IKEA accessory?
No. Niro3D designs and prints it. SKÅDIS is the name of the IKEA board it is drawn for; we have no tie to IKEA.
What is it printed in?
In PLA. The colour is chosen when ordering, and the part prints in one piece without supports.
What materials are available for this product?
Available in PLA, PETG, and special finishes like PLA Silk and PLA Galaxy. PLA is ideal for decorative items; PETG for functional parts requiring durability. Select your material at checkout.
Fig. 06 — Start here
Ready to start printing?
Upload your model or choose from ready-made prints. See the price right after upload.