3D Printing 22/11/2026 Nichita Roilean, Founder 6 min read

Useful 3D Prints: 12 Ideas for Home, Workshop and Desk

The most useful 3D prints solve small, repeating problems: where to put a tool battery, a phone, headphones or coffee capsules. Twelve ready-made ideas with material, print time and price, each one printed in PLA or PETG.

Close-up of a 3D printer head printing with orange filament in a workshop.
Close-up of a 3D printer head printing with orange filament in a workshop. Photo by Jakub Zerdzicki on Pexels

The most useful 3D prints solve small problems that keep coming back: a holder for a cordless tool battery, a stand for your phone or headphones, a rack for coffee capsules, a hook for the car. Each of the twelve ideas below is a ready-made template you can order printed in PLA or PETG, from 53 Kč (about 24 minutes of printing) up to 1 108 Kč for the largest one, and if you need something that is not on the list, you can upload your own model and see the price right away.

Useful prints share three traits: they are simple shapes, they hold a real load or a real object, and the right material matters more than the fine detail. That is why most of them are printed in PETG (tough, slightly flexible, handles heat and damp) or PLA (rigid, good for indoor use).

12 useful things to 3D print

All of these are in the shop with the size, material, print time and price shown on each product page. Prices include VAT and were correct on the day of writing; the product page shows the current price.

Print Size Material Print time Price
Bosch 18V battery holder 70 × 61 × 17 mm PETG 41 min 92 Kč
DeWalt 20V battery holder 88 × 60 × 18 mm PETG 56 min 99 Kč
Parkside 20V battery holder 53 × 60 × 17 mm PETG 37 min 91 Kč
Car headrest hook 109 × 66 × 27 mm PETG 59 min 174 Kč
Foldable travel clothes hanger 101 × 191 × 12 mm PETG 4 h 35 min 419 Kč
Flow phone stand 90 × 79 × 75 mm PLA 2 h 50 min 279 Kč
Ascent headphone stand 192 × 236 × 147 mm PLA 8 h 59 min 644 Kč
Gaia pencil organiser 115 × 115 × 106 mm PLA 7 h 11 min 622 Kč
Paint rack for 22 mm bottles, 6 colours 39 × 200 × 67 mm PLA 2 h 31 min 290 Kč
Euro coin tray, 2 € 35 × 62 × 15 mm PLA 24 min 53 Kč
Nespresso capsule stand, 25 sleeves 207 × 206 × 176 mm PETG 13 h 40 min 1 108 Kč
Dolce Gusto capsule storage box 232 × 177 × 30 mm PLA 8 h 19 min 850 Kč

The price is made of material and print time, with a minimum of 49 Kč per part.

For the workshop and the garage

Battery holders for cordless tools are the most practical entry on the list: we have them for Bosch 18V, DeWalt 20V and Parkside 20V. They are printed in PETG, which handles heat and damp, and one holder prints in 37 to 56 minutes. The headrest hook for the car is also PETG; PLA would soften in a hot car.

For the desk and the office

The Flow phone stand prints in under three hours, the Gaia pencil organiser in about seven and the Ascent headphone stand in about nine. All three are PLA, which belongs indoors. If you want a useful desk item to carry a company logo, see branded desk accessories. For your hands while you work, there is the fidget cube.

For the kitchen and the home

There is a Nespresso capsule stand for 25 sleeves, a Dolce Gusto storage box, a foldable travel hanger and euro coin trays, made separately for 10, 20 and 50 cent coins and for 1 and 2 euro coins. For plants we print an orchid pot and a succulent planter.

PLA or PETG for useful prints

We print in PLA and PETG. PLA suits indoor use, figures and prototypes; PETG is tougher, slightly flexible and handles heat and damp, so choose it for anything in a garage, a car or a kitchen. We also offer matte PLA, translucent PETG and marble, galaxy, gradient and silk finishes, with over 30 colours in stock: see materials and colours. Not sure which to pick? Read PLA vs PETG: how to choose.

When nothing in the shop fits: print your own part

Missing a part that is no longer sold, or need a holder made to measure? Upload a model in STL, 3MF, OBJ or STEP format (up to 150 MB) on the upload page and the price appears right after the upload. Custom parts start at 49 Kč each, the minimum order is 150 Kč, and a single piece is fine. The largest part we can print in one piece is 228 × 246 × 245 mm.

No model? Send a sketch, a photo or a description; 3D modelling costs 650 Kč per hour. For a spare part, send photos of the undamaged piece from several angles, a technical drawing or the physical sample, and we measure and model it. Details are on the spare parts page and in 3D printed spare parts: fix, don't throw away. The whole custom printing service is explained in one place.

Most orders are printed and shipped within 48 hours. Within the Czech Republic we deliver by Zásilkovna and courier in 1 to 3 working days.

FAQ

What are the most useful things to 3D print?

Things that solve a repeating problem: tool battery holders, phone and headphone stands, capsule storage, coin trays, hooks and replacement parts. The list above has twelve you can order today, from 53 Kč.

What is the cheapest useful 3D print?

The euro coin tray at 53 Kč (24 minutes of printing). Battery holders for Parkside, Bosch and DeWalt cost 91 to 99 Kč. Any custom part starts at 49 Kč.

Which material is best for useful prints?

PETG for anything that sees heat, damp or load (garage, car, kitchen, tool batteries). PLA for indoor desk and display items. We print both.

Can you print a part that I designed or found online?

Yes. Upload an STL, 3MF, OBJ or STEP file up to 150 MB and the price shows after the upload. Even one piece can be ordered.

Can you replace a broken or discontinued part?

Yes. Send photos of the undamaged piece from several angles, a technical drawing or the physical sample and we model it for you. Modelling is 650 Kč per hour.

How long does it take?

Most orders are printed and shipped within 48 hours; delivery inside the Czech Republic takes 1 to 3 working days.

Questions

What this article answers

Ready to start printing?

Upload your model or choose from ready-made prints. See the price right after upload.